Mash
  • News
  • Economy
  • The science
  • Finance
  • Food
  • Holidays
  • Real estate
CanberraNews – latest news from the capital of Australia
  • News
  • Economy
  • The science
  • Finance
  • Food
  • Holidays
  • Real estate

Preparation of ordinary ceilings for repair.

  • December 17, 2024

Preparing ordinary ceilings for repair.

In order to prepare ordinary ceilings for repair, you need to wash off the old whitewash and paint or remove the wallpaper. The whitewash is washed off with a brush dipped in warm water and cleaned by a spatula. First, its layer is soaked, and then scraped off. If there are cracks on the ceiling, they must be carefully cleaned. It is usually not possible to completely remove the old whitewash. The remains of the layer need to be rubbed and washed away with a wet brush.

Conventional ceilings need to be cleaned of the old finish, since otherwise the new coating will be difficult to apply. And it will be bad.

If after flooding on the ceiling there are stains, you will not be able to defeat them with whitewashing – they will take. So that this does not happen, the spots must be treated with the help of the brush by the bleach, which contains chlorine. This must be done until the spots disappear.

Each subsequent layer of paint on the ceiling is applied only after the previous layer is completely dry. If the ceiling was previously covered with water -based paint, it can not be treated before a new coating. It is only necessary to clean it from dust and particles that are poorly held, and break off cracks on the ceiling. Then the surface is covered with a primer and putty.

The old layer of wallpaper is well removed with warm water, in which the detergent is added. In order for the wallpaper to get wet better, they can make small cuts in them, then moisten the surface and put it for half an hour with this state. Then the layer of wallpaper is cleaned with a wide spatula. From the surface freed from the wallpaper with water, the scraper and brushes remove the remnants of glue and old whitewashing. Then the surface is putty, polished and primed.

In raw and impatient rooms on the ceilings and walls, mold is often formed. The affected areas must be thoroughly scraped along with putty. Then they are treated with a 20%solution of chlorine lime or antifungal agent. After the surface dries, ordinary ceilings are put down and primed.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Advantages of porcelain tiles

  • January 23, 2025
View Post

For and against sex on corporate party

  • January 22, 2025
View Post

Skirt on the floor: beautiful and fashionable

  • January 14, 2025
View Post

Yak Otrimati “Golіvudsku”?

  • January 13, 2025
View Post

Walking and running in fitness

  • January 9, 2025
View Post

Preparation of walls for repair

  • January 8, 2025
View Post

Preparation of walls for painting

  • December 31, 2024
View Post

Meet clothing: Fashion trends in 2015

  • December 23, 2024
Featured Posts
  • Men’s trends in female fashion
    • August 28, 2018
  • What must be taken into account with any roofing structures and materials
    • June 11, 2018
  • Fruit diet – Life with pleasure!
    • June 28, 2018
  • Pros and cons of cast -iron radiators.
    • October 5, 2018
  • What you need to know about the installation of the iron door?
    • July 31, 2018
Recent Posts
  • Advantages of metal tiles
    • January 27, 2025
  • Drawing classes for preschoolers
    • January 27, 2025
  • Yoga classes for beginners
    • January 24, 2025
CanberraNews – latest news from the capital of Australia
  • © CanberraCityNews – canberracitynews.com, 2017-2024.

Input your search keywords and press Enter.