Mash
  • News
  • Economy
  • The science
  • Finance
  • Food
  • Holidays
  • Real estate
CanberraNews – latest news from the capital of Australia
  • News
  • Economy
  • The science
  • Finance
  • Food
  • Holidays
  • Real estate

Preparing the surface for the wallpaper how to make repairs

  • December 24, 2024

Published 29.01.2014

Before proceeding directly to the wallpaper by wallpaper, it is necessary to make their primer. To do this, it is quite possible to use the usual wallpaper glue, for example, the well -known METYLAN. This is very practical, since the glue remaining after the primer can be used for the adhesive of the wallpaper.

To prepare glue for the primer, it is necessary to dilute the contents of the pack (250 grams) in 5-6 liters of cold water. In this case, the resulting mixture must be constantly stirred with a mixer, falling asleep dry glue on the external radius of the formed funnel. Stir the mixture for 30 seconds, then leave it for 3-5 minutes until the dry substance is completely dissolved.

Thus, for a room whose ceiling area is 16 m? Two packs of glue are needed 250 grams. This amount is necessary for priming the surface and adhesives of the wallpaper.

For priming the surface to the resulting mixture, you need to add another 6-7 liters of water, mixing everything with a mixer. As a result, a homogeneous mixture should be obtained by consistency similar to liquid kefir.

Then apply the resulting mixture to the surface of the walls. It will be most convenient to do with a fur roller with a pile height 16-18 millimeters.

Also, the primer of the walls can be done with special tools intended for this. It can be, for example, P-Primer primer.

If it is planned to past over the walls with non -woven wallpaper with color, you need to paint the walls with water -based paint in white. To do this, you can take any water -based paint, for example Powertex. The main thing is not to use any tints for paint, since it has the ability to step on the front side of the wallpaper at their joints.

If rust still appeared through the primer layer, then you can get rid of such spots with the help of white enamel paint, for example .

But the drying time of the primer layer is an average of 3-5 hours.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Drawing classes for preschoolers

  • January 27, 2025
View Post

For and against

  • January 22, 2025
View Post

Advantages of ceramic tiles

  • January 21, 2025
View Post

Why do we need orthopedic pillows and mattresses?

  • January 21, 2025
View Post

Jewelry – there is no gift better for March 8

  • January 15, 2025
View Post

Preparation of the site for construction

  • January 15, 2025
View Post

Preparation of walls for painting

  • January 13, 2025
View Post

Choice of Diamond Jewelry

  • January 8, 2025
Featured Posts
  • Life on a plate
    • September 19, 2018
  • Excuses in the life of a loser
    • November 26, 2018
  • Rest in the Carpathians in winter
    • November 21, 2018
  • Rest in the ocean
    • November 15, 2018
  • Ways to make money on a women’s website
    • March 22, 2019
Recent Posts
  • Advantages of metal tiles
    • January 27, 2025
  • Drawing classes for preschoolers
    • January 27, 2025
  • Yoga classes for beginners
    • January 24, 2025
CanberraNews – latest news from the capital of Australia
  • © CanberraCityNews – canberracitynews.com, 2017-2024.

Input your search keywords and press Enter.